L'ensemble Living Wall™ est conçu avec des supports de montage mural extensible d'où jusqu'à quatre grands et quatre petits pots peuvent être suspendus à la verticale.
L'ensemble inclut également un système d'arrosage goutte-à-goutte professionnel intégré pour fournir certaines quantités d'eau dans chaque pot.

Living Wall™ prend en charge un espace ouvert entre les pots et le mur, afin d'assurer la protection et la décoloration du mur exposé à l'humidité.

Caractéristiques:

• Support de montage mural pratique et durable afin de permettre au pots d'être facilement accroché et retiré du support.
• Possibilité d'installer plusieurs supports de montage les uns aux autres grâce au système unique auto-lock.
• Les pots peuvent être facilement monté et enlevé à chaque saison.
• L'approvisionnement en eau est presque tous hors de vue à l'exception des très petits micro tuyaux qui fournit l'eau à un goutteur de compensation de pression positionnés à chaque pot.
• La ligne d'eau du Living Wall™ jardin vertical peut être branché à un robinet extérieur ou un boyau d'arrosage.
• Toutes les connexions d'irrigation goutte à goutte et de pièces supplémentaires sont standard..
• Utilise des goutteurs de compensation de pression doté de clapets anti-retour afin d'éliminer la vidange lorsque le système est éteint.
• Rapide et facile à installer.

Spécifications:

• Small pot size: 4.7" (12 cm) width x 5.1/2” (14 cm) depth x 6 1/2” (16 cm) height
• Large pot size: 7” (17 cm) width x 6 7/8” (17 cm) depth x 6 1/2” (16 cm) height
• Pot color: grey
• Pot weights:
  • Small pot: .367 lbs. (.166 kg)
  • Large pot: .592 lbs. (.269 kg)
• Modular wall mounting bracket: 7” (17.8 cm) Width x .7” (1.7 cm) Depth x 4.5” (11 cm) Height
• Wall mounting bracket color: black
• Screw size: # 8 x ¾” length
• Wall mounting bracket weight: .121 lbs. (0.055 kg)
• Drip irrigation operating pressure: 10-50 PSI (.7 to 3.4 bar)
• Number of drippers: 8
• Required opening pressure: 4.3 PSI (.3 bar)
• Closing pressure: 2.2 PSI (.15 bar)
• Flow rates and color codes:
  • .3 GPH (1.1 L/H) color code brown inlet x gray outlet
• Dripper inlet size: ¼” barb
• Dripper outlet side: 1/8” (3 mm) barb
• The irrigation kit is expandable up to 65 pots using ¼” (6 mm) micro tubing as the main line. If larger the main line shall need to be ½” (16 r 17 mm).

L'ensemble Living Wall™ est un nouveau concept de jardinage permettant le positionnement rapide, le montage et l'expansion des pots plantés verticalement. L'ensemble utilise des supports de montage, qui peuvent être attachés à n'importe quelle structure extérieure. Un mur vert de croissance, facile à monter.

Kit includes:

• 4 Small pots
• 4 Large pots
• 8 Modular wall mounting bracket with screws
• 1 25 PSI  preset pressure regulator
• 1 3/4" x 1/4"  adapter
• 1 Screen filter washer
• 1 Punch
• 10 1/4"  tees
• 2 1/4" barbs
• 4 1/4" barbed elbows
• 8 .3 gph PC -CV drippers
• 8 2' lengths of 1/8" micro tube
• 8 stakes

Location is important in growing a Living Wall™ vertical garden. Growing on a vertical surface means that the amount of full sunlight may be restricted. Review the location and planting type that should be planted in the selected location. Also, think about where your water source will be and how easily you can connect to the water supply line.

Determine what pattern you want to create and mount the wall mounting brackets accordingly. Due to the wall mounting bracket modular design, for best results and easy installation, start from left side and keep a space of between 12" to 18" (30 to 45 cm) between each level.

Once you have determined where your first wall mounting bracket is to be located, hold it against the wall and get it level. It is most important that you get it level if you are going to add more brackets, because a small level error may magnify as the line of wall mounting brackets grows longer. We recommend using a minimum of two screws per each mounting bracket and to utilize the two holes at the top, on the left and right of the DIG logo (see illustration). Each mounting bracket has eight holes but no more than two to four screws are needed. Use a screwdriver to mount the first bracket to the wall or structure using the screws provided.

If attaching to a solid wall made of brick or concrete, use a masonry bit to drill the holes.

Once a single wall mounting bracket is mounted, place an additional bracket and secure it to the first one; then continue mounting all other mounting brackets using the same method.

Specifications

• Small pot size: 4.7" (12 cm) width x 5.1/2" (14 cm) depth x 6 1/2" (16 cm) height
• Large pot size: 7" (17 cm) width x 6 7/8" (17 cm) depth x 6 1/2" (16 cm) height
• Pot color: grey
• Pot weights:
  • Small pot: .367 lbs. (.166 kg)
  • Large pot: .592 lbs. (.269 kg)

Pots Planting and mounting

Plant the pots before mounting them into the wall mounting brackets. One of the main features of DIG's Living Wall™ vertical garden is that the pots can be removed from the mounting brackets. This means that the potting can be completed at a bench at a good working height. The plants can even be established on the ground before mounting onto wall mounting brackets. Once the pots have been mounted to the panels, if something goes wrong, it's easy to remove a single pot and solve the problem and even replant and then pop it back into its original position.

1. Position the meshed screen plate inside the pot with the two supporting legs faced down.
2. Plant the pot using the correct selecting the right potting mix for the plants used.
3. Mount the pots onto the wall mounting brackets. Each pot has a flat hook at the rear that slides into the center slot on the mounting brackets. The slot is wider than the flat hook and this allows some movement when positioning the pots.
4. Once the pot is mounted and in position, insert the micro stake into the pot and position the micro stake near the center of the pot. Anchor the micro stake, which can be pushed into the potting mix, so it doesn't get blown or sprung out of position.
5. If you are growing a selection of plants, please be aware that the top row is best for taller growing plants as their natural vertical habit of growth is upward. For the second row of panels with pots it's better to choose plants with a flat or even trailing growth habit so these can get access to sunlight.
6. Once all the pots are in place and the drip system is connected, turn the water on and check if the system is working well. If it is leaking somewhere, investigate the issue and fix it. Pressure-test the system to identify leaks in the laterals and fittings, and then program the hose end timer if used.
7. Water the plants as regularly as required. As a rule, the surface of the soil should dry out between each watering. Watering requirements will vary as determined by location, weather, plant and soil type. Use a hose end timer to regulate how much water is applied to the plants.
8. It is a simple to add extra pots. Once you have the mounting brackets pots installed use the same method to add additional wall mounting brackets and pots. Use the same method to expand the irrigation system.

Specifications

• Small pot size: 4.7" (12 cm) width x 5.1/2" (14 cm) depth x 6 1/2" (16 cm) height
• Large pot size: 7" (17 cm) width x 6 7/8" (17 cm) depth x 6 1/2" (16 cm) height
• Pot color: grey
• Pot weights:
  • Small pot: .367 lbs. (.166 kg)
  • Large pot: .592 lbs. (.269 kg)

Pots Planting and mounting

Plant the pots before mounting them into the wall mounting brackets. One of the main features of DIG's Living Wall™ vertical garden is that the pots can be removed from the mounting brackets. This means that the potting can be completed at a bench at a good working height. The plants can even be established on the ground before mounting onto wall mounting brackets. Once the pots have been mounted to the panels, if something goes wrong, it's easy to remove a single pot and solve the problem and even replant and then pop it back into its original position.

1. Position the meshed screen plate inside the pot with the two supporting legs faced down.
2. Plant the pot using the correct selecting the right potting mix for the plants used.
3. Mount the pots onto the wall mounting brackets. Each pot has a flat hook at the rear that slides into the center slot on the mounting brackets. The slot is wider than the flat hook and this allows some movement when positioning the pots.
4. Once the pot is mounted and in position, insert the micro stake into the pot and position the micro stake near the center of the pot. Anchor the micro stake, which can be pushed into the potting mix, so it doesn't get blown or sprung out of position.
5. If you are growing a selection of plants, please be aware that the top row is best for taller growing plants as their natural vertical habit of growth is upward. For the second row of panels with pots it's better to choose plants with a flat or even trailing growth habit so these can get access to sunlight.
6. Once all the pots are in place and the drip system is connected, turn the water on and check if the system is working well. If it is leaking somewhere, investigate the issue and fix it. Pressure-test the system to identify leaks in the laterals and fittings, and then program the hose end timer if used.
7. Water the plants as regularly as required. As a rule, the surface of the soil should dry out between each watering. Watering requirements will vary as determined by location, weather, plant and soil type. Use a hose end timer to regulate how much water is applied to the plants.
8. It is a simple to add extra pots. Once you have the mounting brackets pots installed use the same method to add additional wall mounting brackets and pots. Use the same method to expand the irrigation system.

Specifications

• Modular wall mounting bracket: 7" (17.8 cm) Width x .7" (1.7 cm) Depth x 4.5" (11 cm) Height
• Wall mounting bracket color: black
• Screw size: # 8 x 3/4" length x 4
• Wall mounting bracket weight: .121 lbs. (0.055 kg)
• Mounting start from the left side
• Spacing: between 12" to 18" (30 to 45 cm) of each level.