Drip Irrigation - DIG Products - DIG Filters and Regulators

Products

Irrigation

Controllers DIY Kits Electrical Plumbing Rain Sensors Spray Pistols and Accessories Sprinklers Tools Valve Boxes Valves Brands Clearance

Drip Irrigation Mist Cooling

Mist Cooling Systems Mist Cooling Accessories

LED Landscape Lights

Controller Lighting Landscape Lighting Wire Motion Sensor LED Landscape Lighting Kits Rain Bird Sprinkler System Design - Customer Shopping List

Store > Drip Irrigation > DIG Products > DIG Filters and Regulators

Items 1 to 4 of 4

Y Filter with Stainless-Steel Screen & Flush Valve

3/4" FHT x MHT - 200 Mesh Screen

SKU : DR-10299-P15-200

DIG PRF Filter/Pressure Regulator

2 in 1 Pressure Filter 25 PSI Regulator - 3/4" NPT

SKU : DR-97160-PRF-25-075

DIG PRF Filter/Pressure Regulator

2 in 1 Pressure Filter 25 PSI Regulator - 1" NPT

SKU : DR-97165-PRF-25-100

28-60 PSI Adjustable Pressure Regulator

28-60 PSI - 3/4 FPT x 3/4" FPT

SKU : DR-12920-PRV075-18-007

Items 1 to 4 of 4

Back to department : DIG Products

3/4" FHT x MHT - 200 Mesh Screen

SKU : DR-10299-P15-200

Product Overview
Specifications

Used for residential and commercial applications. Simple and easy to operate, the filters provide reliable, low-maintenance filtration for trouble-free operation.

Features and Benefits

Low friction loss
Screens have excellent resistance to most common chemicals
Color coded replacement screens
Includes flush valve
Easy maintenance: screen can be extracted from filter for easy cleaning
Non-corrosive materials
Interchangeable screen and disc elements with a wide range of filtration degrees

Specifications:

Operating Pressure: Up to 120 PSI (8.4 BAR)
Temperature Range: Up to 130F (54C)
3/4" Swivel FHT x 3/4" MHT
200 mesh stainless steel screen

Materials Housing:

Polypropylene
O-ring: EPDM

Chemical Resistance:

Acids: Very good resistance depending on concentration and temperature. Excellent resistance to most mineral acids
Alkali: Limited resistance depending on concentration and temperature Excellent resistance to low concentrated lyes. Not recommended for use in highly concentrated lyes

2 in 1 Pressure Filter 25 PSI Regulator - 3/4" NPT

SKU : DR-97160-PRF-25-075

DIG’s two-in-one, 3/4” and 1” Filter/Pressure Regulator combines a 150-mesh stainless steel filter with a 25-PSI or 45-PSI pressure regulator, reducing the number of components needed to start a drip irrigation zone. The heavy-duty filter/pressure regulator’s compact design fits in smaller sized areas allowing several drip zones inside an irrigation box. For best results install it upstream of the control valve for reliable operation and easy maintenance of a drip irrigation zone.

Features:

Compact design - combines two units in one to allow for faster and easier installation
All-purpose screen filter with built-in pressure regulator for use in drip irrigation or micro sprinkler systems
One-piece construction that combines a 150-mesh stainless steel screen filter and a pressure regulator
Reduces incoming water pressure and protects downstream drip irrigation components
Stainless steel screen has excellent resistance to most common chemicals
Easy maintenance - the screen can be removed from the filter for easy cleaning
Heavy duty glass-filled polypropylene body provides reliable operation under a wide range of pressures
Available in 3/4” or 1” with a 25- or 45-PSI pressure regulator
Available with a 3/4” flush cap at the bottom of the filter for easy flushing
Provides simple conversion of an AC/DC valve into a drip zone and easily fits in a valve box
Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions for years of reliable operation

2 in 1 Pressure Filter 25 PSI Regulator - 1" NPT

SKU : DR-97165-PRF-25-100

Features:

Compact design - combines two units in one to allow for faster and easier installation
All-purpose screen filter with built-in pressure regulator for use in drip irrigation or micro sprinkler systems
One-piece construction that combines a 150-mesh stainless steel screen filter and a pressure regulator
Reduces incoming water pressure and protects downstream drip irrigation components
Stainless steel screen has excellent resistance to most common chemicals
Easy maintenance - the screen can be removed from the filter for easy cleaning
Heavy duty glass-filled polypropylene body provides reliable operation under a wide range of pressures
Available in 3/4” or 1” with a 25- or 45-PSI pressure regulator
Available with a 3/4” flush cap at the bottom of the filter for easy flushing
Provides simple conversion of an AC/DC valve into a drip zone and easily fits in a valve box
Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions for years of reliable operation

28-60 PSI - 3/4 FPT x 3/4" FPT

SKU : DR-12920-PRV075-18-007

Product Overview

Pressure regulators control and reduce the pressure entering your system to the recommended operating pressure of the drip or micro sprinkler system.

The pressure regulator, will reduce the pressure only when water is discharged from the system.

The pressure regulators are only designed for use in your irrigation systems and should be installed after your filter. Choose the correct thread (hose or pipe).

The pressure regulators should never be installed on a mainline where they are under constant pressure. In this situation, they need to be installed after the valve.