The Easy Dial(TM) Indoor Timer makes programming a snap! Utilizing Orbit's Easy-Set Logic(TM) programming, your timer can be watering in a few minutes. This new timer also includes tool-less wiring terminals, auto-reset circuit breaker, and large easy-to-read LCD and dial.
Simple programming with Easy-Set Logic(TM)
Large LCD for easy reading
Large Dial and Buttons
FEATURES AND BENEFITS
Two Programs—Programs A and B offer multi-use and flexible watering schedules by days of the week, even or odd days, or at intervals of 1 to 32 days.
3 Start Times Per Program—Flexibility to manage schedules for variable plant requirements and soil types.
Program Data Safely Stored—Power out? One Lithium CR2032 battery (included) is required to retain the program in memory during power loss. All programming information is stored.
Manual Advance—One-button station affords convenience of quick select and advance during manual watering.
Indoor Cabinet
OPERATING SPECIFICATIONS
Station Timing: From 1–240 minutes
Automatic Starts: Up to 6 start times per day
Programming Schedule: Days of week, watering intervals and odd/even days
Rain Delay: Setting for 24 hours and more
ELECTRICAL SPECIFICATIONS
Transformer Output: 24VAC/26VAC, 600mA
Battery Backup: One Lithium CR2032 battery
Wire Terminal: Tool-less color coded
No Pump Start or Master Valve Terminal
Surge Protection: Primary input has built-in MOV (metal oxide varistor), valve wire MOV protects against lightning strikes
Compatible with all major brands of controllers including Hunter®, Irritrol®, Nelson®, Rainbird® and Toro®.
This straightforward, user-friendly sprinkler controller combines simplicity of operation with feature-rich flexibility. For starters, the Orbit Swing Panel timer is enclosed in an indoor/outdoor UL approved case capable of 4, 6, 9 or 12 watering stations. Each model offers three independent programs – A and B and C – with up to four start times per program. Water conservation features? Of course! The Swing Panel timer water budgeting feature allows you to set watering durations from 10 to 200 percent of the programmed time, in 10 percent increments. There’s even a station advance button that lets you skip to the next station while watering. Plus, you’ll appreciate the simplicity of the large, easy-to- read LCD display, as well as the big buttons and dial – the perfect enhancements for easy user operation.
BUILT FOR SPEED ADVANTAGES
Fast to Program—Large dial, oversized LCD display, make programming quick and easy.
Fast to Install—Factory-installed plug-and-go power cord means no in-field transformer wiring is required.
Hinged Panel—Door allows quick and easy access to valve wiring (shown on back).
BUILT FOR GREEN ADVANTAGES
Watering Budgeting—Match seasonal watering requirements by increasing or decreasing the durations of the stations in any of the two programs from 10%~200% of base schedule.
Rain Delay—Rain sensor bypass technology allows manual or automatic rain delay of 24-hours, 48-hours and 72-hours.
24 Volt Out Rain Sensor Terminals—Make installation of wireless rain sensor receiver quick and convenient.
FEATURES AND BENEFITS
Three Programs—Programs A, B and C offer multi-use and flexible watering schedules by days of the week, even or odd days, or at intervals of 1 to 32 days.
4 Start Times Per Program—Flexibility to manage schedules for variable plant requirements and soil types.
Program Data Safely Stored—Power out? Batteries run down? No worries! All programming information is stored.
Manual Advance—One-button station affords convenience of quick select and advance during manual watering.
Indoor/Outdoor Cabinet—Weather tight and locking for safety, security and peace of mind.
OPERATING SPECIFICATIONS
Station Timing: From 1–240 minutes
Automatic Starts: Up to 12 start times per day
Programming Schedule: Days of week, watering intervals and odd/even days
Rain Delay: Setting for 24, 48 and 72 hours
Water Budgeting: Adjusts for seasonal watering demands (10% to 200% in 10% increments)
ELECTRICAL SPECIFICATIONS
Transformer Output: 24VAC/26VAC, 600mA
Battery Backup: 3V lithium (program saved in non-volatile memory)
Wire Terminal: Tool-less color coded
Pump Start Terminal
Surge Protection: Primary input has built-in MOV (metal oxide varistor), valve wire MOV protects against lightning strikes
Compatible with all major brands of controllers including Hunter®, Irritrol®, Nelson®, Rainbird® and Toro®.
“Turbulent” labyrinth wide water passages for highest reliability and efficiency.
Features and Benefits:
Allows placement of drippers exactly where necessary.
Allows maximum flexibility in greenhouse and nurseries (with soft micro-tubes).
Allows installation of other drippers to add compensated and anti-drain functionality.
Accessory to all on-line drippers for better and more accurate installation.
Adaptable to all on-line drippers via barb, manifold or adapter.
MODEL
GPH at 15 PSI
GPH at 20 PSI
GPH at 25 PSI
GPH à 30 PSI
Straight
0,5
0,6
0,7
0,8
Angle
0,6
0,7
0,8
0,9
Transition Adapter
Transition Adapter with O'Ring 1" Mipt x 1" Mipt
SKU : P-98020-23-014
The manifold accessories are designed to provide the simplest assembly, repair, or expansion of sprinkler valve manifolds without the use of any special tools. Union connections with water tight o-ring seals eliminate the need for glue, and high impact construction gives these manifolds the strength to last.
Works with all female threaded irrigation valves
Transition Adapter
Transition Adapter with O'Ring 1" Mipt x 3/4" Mipt
SKU : P-98030-23-015
The manifold accessories are designed to provide the simplest assembly, repair, or expansion of sprinkler valve manifolds without the use of any special tools. Union connections with water tight o-ring seals eliminate the need for glue, and high impact construction gives these manifolds the strength to last.
Works with all female threaded irrigation valves
Arrow Dripper "Style".
Straight Model with Stake - 9,5 cm (3¾")
SKU : DR-10250
Applications:
Greenhouses, nurseries, garden pot irrigation.
Specifications:
Maximal working pressure: 30 PSI (2 bar)
Recommended filtration: 120 mesh (130 micron).
2 different models to meet growers’ requirements.
To be “inserted” into a 3*5 mm micro-tube.
Injected dripper, very low CV.
“Turbulent” labyrinth wide water passages for highest reliability and efficiency.
Features and Benefits:
Allows placement of drippers exactly where necessary.
Allows maximum flexibility in greenhouse and nurseries (with soft micro-tubes).
Allows installation of other drippers to add compensated and anti-drain functionality.
Accessory to all on-line drippers for better and more accurate installation.
Adaptable to all on-line drippers via barb, manifold or adapter.
The first reliable wireless rain sensor provides fast installation on any system.
If the thought of running wires from a controller has kept you from adding rain sensors to your systems, now there’s a hasslefree alternative. The Hunter Wireless Rain-Clik™ attaches quickly and easily–simply install the receiver unit next to your irrigation controller, then install the transmitter anywhere that the device can receive representative rainfall. No ladders needed to attach to a high outcropping on a building, no messy wires to hide out of view. What also sets a Hunter Rain-Clik apart are features no other rain-sensing device offers. The unique Quick Response™ feature allows the product to shut off immediately when it starts to rain. And, unlike its competition, Hunter’s sophisticated sensing mechanism cannot be fouled by debris, giving the Wireless Rain-Clik the most highly accurate operation.
Instant Quick Response rain shutoff and freeze shutoff at 37°F
Maintenance-free design with integrated battery for wireless models
Adjustable vent ring allows for shorter or longer reset period
Rugged polycarbonate housing and metal extension arm
Includes gutter bracket and wall mount with wireless models
Compatible with most normally open or normally closed irrigation controllers
The Brass Nozzle Plug is used in place of a mist nozzle on all outdoor mist cooling systems. These plugs are used to replace nozzles in the off season when the mist system is not used and the mist nozzles are being stored. Nozzle plugs prevent debris and insects from entering the mist line and clogging the system. They are also useful to plug off openings when less mist is desired.
Rain Bird 5000 Series Rotary Sprinklers | 20 PACK
5004 Model with 12 nozzles - 4" Pop-Up (10 cm) - 20-PACK
The 5000 Series Rotor is a rugged mid-range gear-drive rotary sprinkler, offering durability, performance, and the convenience of arc adjustment from the top, for residential and light commercial applications.
This versatile rotor offers a standard rubber cover and the convenience of reversing full-and part-circle operation (up to 360 degrees) in one unit. And, with a tree of Rain Curtain™ nozzles, the 5000 Series Rotor offers excellent distribution for top-notch efficiency. All of this, a proven gear-driven design, and a five-year trade warranty, makes the 5000 Series Rotor one head that will "Take Performance to the Top."
FEATURES & BENEFITS
Rain Curtain Nozzle Technology—Rain Curtain Nozzles standard on all 5000 Series Rotors. Large water droplets for greater wind resistance.
Rubber Cover—Keeps the dirt out of adjustment components.
Lubricated Gear Assembly— For years of reliable use.
Precision Reversing Mechanism— Provides years of smooth non-delayed forward and reverse rotation.
Adjustable—Key adjusts arc from 40 to 360 degrees, and radius can be reduced up to 25 percent.
Slip clutch mechanism for quick adjustment on installation.
Faster maintenance with a new self-cleaning arc adjustment screw.
Top-adjust arc adjustment requiring only a flathead screwdriver.
Heavy-duty retract spring assures positive pop-down.
OPERATION RANGE
Radius: 22' to 50’ (6,7 to 15,2 m)
Radius may be reduced up to 25% with radius reduction screw
Pressure 25-65 psi (1,7 to 4,5 Bars)
Flow rate: 0.7 to 9.6 GPM (3,0 à 36,6 l/m)
SPECIFICATIONS
3/4" FNPT bottom inlet
Four low angle nozzles (angle of trajectory 10°)
Eight standard angle nozzles (angle of trajectory 25°)
The Atmospheric Vacuum Breaker is designed to prevent contaminants from entering the main water supply through sprinkler heads. It is not designed to be used as a mainline anti-siphon device.
Weathermatic's AAN adjustable arc nozzle series offers easy grip-and-turn adjustment, wet or dry. Exceptional uniform coverage. Flow increase or decrease proportionately with radius adjustment to maintain matched precipitation rates (MPR) between radii and arcs within a radius.
SPECIFICATIONS:
Fits LX Series Sprinklers, LXS, 72 and 73 Shrub.
Easy arc adjustment.
Color-coded for easy identification
Stainless steel radius adjustment screw.
Screens included with nozzles.
Reusable, dual copartment ziploc bags for organizing nozzles and strainers.
Universal - Fits all Hydro-Rain®, Rain Bird®, Hunter®, Orbit and Weathermatic spray head sprinklers
Weathermatic's AAN adjustable arc nozzle series offers easy grip-and-turn adjustment, wet or dry. Exceptional uniform coverage. Flow increase or decrease proportionately with radius adjustment to maintain matched precipitation rates (MPR) between radii and arcs within a radius.
SPECIFICATIONS:
Fits LX Series Sprinklers, LXS, 72 and 73 Shrub.
Easy arc adjustment.
Color-coded for easy identification
Stainless steel radius adjustment screw.
Screens included with nozzles.
Reusable, dual copartment ziploc bags for organizing nozzles and strainers.
Universal - Fits all Hydro-Rain®, Rain Bird®, Hunter®, Orbit and Weathermatic spray head sprinklers
Weathermatic's AAN adjustable arc nozzle series offers easy grip-and-turn adjustment, wet or dry. Exceptional uniform coverage. Flow increase or decrease proportionately with radius adjustment to maintain matched precipitation rates (MPR) between radii and arcs within a radius.
SPECIFICATIONS:
Fits LX Series Sprinklers, LXS, 72 and 73 Shrub.
Easy arc adjustment.
Color-coded for easy identification
Stainless steel radius adjustment screw.
Screens included with nozzles.
Reusable, dual copartment ziploc bags for organizing nozzles and strainers.
Universal - Fits all Hydro-Rain®, Rain Bird®, Hunter®, Orbit and Weathermatic spray head sprinklers
Weathermatic's AAN adjustable arc nozzle series offers easy grip-and-turn adjustment, wet or dry. Exceptional uniform coverage. Flow increase or decrease proportionately with radius adjustment to maintain matched precipitation rates (MPR) between radii and arcs within a radius.
SPECIFICATIONS:
Fits LX Series Sprinklers, LXS, 72 and 73 Shrub.
Easy arc adjustment.
Color-coded for easy identification
Stainless steel radius adjustment screw.
Screens included with nozzles.
Reusable, dual copartment ziploc bags for organizing nozzles and strainers.
Universal - Fits all Hydro-Rain®, Rain Bird®, Hunter®, Orbit and Weathermatic spray head sprinklers
Easy-to-install Hydro-Lock fittings for drip irrigation are available in a wide range of configurations for 1/2" poly tubing and dripline applications (.670 to .710 OD).
Quick & Easy Installation & Removal
Reusable – Just unscrew
High Quality Plastic with UV Protection
Fits both 1/2" .670 to .710 OD Poly Tubing
Fits both 1/2" .670 to .710 OD Dripline
Recommended Operating Pressure: 10 to 30 PSI
Maximum Operating Pressure: 70 PSI
Allowable Tubing Inside Diameter: .570” - .630” ID
Note: Work's but not recommanded with 1/2" Poly Pipe White Stripe Series.
A Mist Calcium Inhibitor Filter is recommended for use on any mist system and should be changed annually. This filter protects the misting system in two ways; it stops solid sediments, as small as 5 microns, from passing through the system, clogging the nozzle orifice, and coats smaller particulates with polyphosphates which enables them to pass easily through the nozzle orifice without forming blockages. A mist filter prolongs the life of the mist nozzle and inhibits nozzle clogging.
Perfect for first time user, the G77AS Drip Irrigation Kit is a complete kit for irrigating groundcovers, shrubs, trees, flowers, roses, vegetable gardens and vines. The kit has all the parts needed to start a system from a faucet or a garden hose, and covers up to 150 sq. ft. This kit easily expands with DIG’s complete line of drip products to cover a larger area of up to 400 sq. ft. as more plants are added using additional drip tubing and PC drip emitters with the same flow rate. The kit includes a 3/4" backflow preventer, 3/4" 25 PSI pressure regulator, 3/4" swivel adapter, 50' of our premium 1/2" drip tubing with .600 ID x .700 OD, 50' of 1/4" micro tubing, PC drip emitters with twenty 1-GPH, two 2-GPH and two 4-GPH PC drip emitters, and all the necessary parts needed to complete the installation.
Features:
Use to water roses, shrubs, groundcover, flowerbeds and trees; ideal for hillsides
Complete kit; covers up to 150 sq ft (can be easily expanded up to 400 sq ft)
Contains 24 1-GPH PC button drip emitters with 20 1-GPH, two 2-GPH and two 4-GPH drip emitters
Applies water at a very low application rate leading to less surface evaporation from leaves and soil
Offers flexibility in irrigation frequency and application rate, minimizing surface compacting and runoff
Designed for new and existing landscapes including difficult terrain, such as slopes and oddly shaped areas
No special tools or glue are needed
Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
ML50 Raised Bed Drip Kit is specially designed to water planter boxes or vegetable gardens planted in rows. The kit contains 50’ of 1/4” dripline with .52 GPH @ 15 PSI or .65 GPH @ 25 PSI drip emitters every 9”, providing up to five lines, with each line up to 10' long (up to 150 sq. ft). The kit can be expanded to cover more than 700 sq. ft. using up to five kits together or expanding the kit using additional 1/2” drip tubing as the supply line, along with additional 1/4” drip line. The kit includes a 3/4" backflow preventer, 3/4" 25 PSI pressure regulator, 3/4" swivel adapter, 50' of our premium 1/2" drip tubing with .600 ID x .700 OD and all the necessary parts to complete the installation.
Features:
Perfect for planter boxes or vegetable garden in-ground installations
Complete kit; covers up to 150 sq ft (can be easily expanded)
Contains 50' of 1/4" drip line with .52 GPH pre inserted drip emitters every 9"
Applies water at a very low application rate leading to less surface evaporation from leaves and soil
Offers flexibility in irrigation frequency and application rate, minimizing surface compacting and runoff
Designed for row plantings, or plants in close spacing of any type
No special tools or glue are needed
Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
Maximum recommended distance for 9" spacing: 28' (8.5 m)
Drip poly tubing length & size: 50' x 1/2" with .600 ID x .700 OD
Drip line length & size: 50' x 1/4" with .170 ID x .240 OD
3/4" FHT x MHT pressure regulator: downstream pressure preset to 25 PSI
PC drip emitter flow rates: .52 GPH @ 15 PSI and .65 GPH @ 25 PSI)
Total flow rate for this kit: 36 GPH (.61 GPM)
Box Contents
Qty
Description
1
3/4" FHT x MHT backflow preventer
1
3/4" FHT x MHT preset pressure regulator
1
3/4" FHT swivel adapter
1
50' of 1/2" poly tubing
1
50' of 1/4" dripline with 9" drip emitter spacing
1
1/2" coupling
3
1/2" tees
8
1/2" elbows
4
1/2" tubing holder stakes
10
1/4" tubing holder stakes
15
1/4" barbs
10
goof plugs
1
hole punch
4
figure "8" hose ends
1
English Instruction manual
Zinc Sweeper Nozzle
with Shut-Off
SKU : OG-27661-58361
Product Description
This sweeper had a heavy jet stream that is ideal for hard to clean areas. The shut off lever easily adjusts flow control.
Features and Benefits
Durable zinc construction
High-impact jet spray for hard-to-clean areas
Comfort grip
Shut off lever adjusts flow control
3/8" Booster Pump - 160 psi - 110V
3/8" 160 psi, 110 Volts
SKU : OM-92100
The booster pump increases regular mist line pressure capacity to 160 psi. This increase enhances the overall system's effectiveness to cool ootdoor areas by creating a finer mist. The pump mounts easily to any wall and connects to your water source with super simple built in Slip Lok connections.
DIG's planter's two sized pots are used in the installation of DIG's Living Wall Modular Vertical Garden. They are designed to be potted at the bench, at a good working height and then mounted into the modular wall mounting brackets as part of your vertical garden.
Features
The Living Wall™ vertical garden planter's pots can be removed from the panel. This means that the potting is done at the bench at a good working height. The plants can even be established on the ground before positioning and mounting onto the modular wall mounting brackets.
The planter's pots are designed with meshed screen plate with two internal supporting legs faced downward that provide root protection, providing a safe growing medium.
The Living Wall™ vertical garden is a low maintenance system that has open layers between the pots and the wall, providing protection from moisture and preventing discoloration of the exposed wall.
Offers the ability to add, remove, re-plant, and re-hang the pots quickly and easily
Potting can be completed at a bench at a good working height before mounting
Once the pots have been mounted to the panels, if something goes wrong, it's easy to remove a single pot and fix the problem and even replant and then pop it back into its original position.
The pots are made with a raised drain hole at the bottom for better water holding capability that may allow for less frequent
Specifications
Small pot size: 4.7" (12 cm) width x 5.1/2" (14 cm) depth x 6 1/2" (16 cm) height
Large pot size: 7" (17 cm) width x 6 7/8" (17 cm) depth x 6 1/2" (16 cm) height
Pot color: grey
Pot weights:
Small pot: .367 lbs. (.166 kg)
Large pot: .592 lbs. (.269 kg)
Pots Planting and mounting
Plant the pots before mounting them into the wall mounting brackets. One of the main features of DIG's Living Wall™ vertical garden is that the pots can be removed from the mounting brackets. This means that the potting can be completed at a bench at a good working height. The plants can even be established on the ground before mounting onto wall mounting brackets. Once the pots have been mounted to the panels, if something goes wrong, it's easy to remove a single pot and solve the problem and even replant and then pop it back into its original position.
Position the meshed screen plate inside the pot with the two supporting legs faced down.
Plant the pot using the correct selecting the right potting mix for the plants used.
Mount the pots onto the wall mounting brackets. Each pot has a flat hook at the rear that slides into the center slot on the mounting brackets. The slot is wider than the flat hook and this allows some movement when positioning the pots.
Once the pot is mounted and in position, insert the micro stake into the pot and position the micro stake near the center of the pot. Anchor the micro stake, which can be pushed into the potting mix, so it doesn't get blown or sprung out of position.
If you are growing a selection of plants, please be aware that the top row is best for taller growing plants as their natural vertical habit of growth is upward. For the second row of panels with pots it's better to choose plants with a flat or even trailing growth habit so these can get access to sunlight.
Once all the pots are in place and the drip system is connected, turn the water on and check if the system is working well. If it is leaking somewhere, investigate the issue and fix it. Pressure-test the system to identify leaks in the laterals and fittings, and then program the hose end timer if used.
Water the plants as regularly as required. As a rule, the surface of the soil should dry out between each watering. Watering requirements will vary as determined by location, weather, plant and soil type. Use a hose end timer to regulate how much water is applied to the plants.
It is a simple to add extra pots. Once you have the mounting brackets pots installed use the same method to add additional wall mounting brackets and pots. Use the same method to expand the irrigation system.
DIG's planter's two sized pots are used in the installation of DIG's Living Wall Modular Vertical Garden. They are designed to be potted at the bench, at a good working height and then mounted into the modular wall mounting brackets as part of your vertical garden.
Features
The Living Wall™ vertical garden planter's pots can be removed from the panel. This means that the potting is done at the bench at a good working height. The plants can even be established on the ground before positioning and mounting onto the modular wall mounting brackets.
The planter's pots are designed with meshed screen plate with two internal supporting legs faced downward that provide root protection, providing a safe growing medium.
The Living Wall™ vertical garden is a low maintenance system that has open layers between the pots and the wall, providing protection from moisture and preventing discoloration of the exposed wall.
Offers the ability to add, remove, re-plant, and re-hang the pots quickly and easily
Potting can be completed at a bench at a good working height before mounting
Once the pots have been mounted to the panels, if something goes wrong, it's easy to remove a single pot and fix the problem and even replant and then pop it back into its original position.
The pots are made with a raised drain hole at the bottom for better water holding capability that may allow for less frequent
Specifications
Small pot size: 4.7" (12 cm) width x 5.1/2" (14 cm) depth x 6 1/2" (16 cm) height
Large pot size: 7" (17 cm) width x 6 7/8" (17 cm) depth x 6 1/2" (16 cm) height
Pot color: grey
Pot weights:
Small pot: .367 lbs. (.166 kg)
Large pot: .592 lbs. (.269 kg)
Pots Planting and mounting
Plant the pots before mounting them into the wall mounting brackets. One of the main features of DIG's Living Wall™ vertical garden is that the pots can be removed from the mounting brackets. This means that the potting can be completed at a bench at a good working height. The plants can even be established on the ground before mounting onto wall mounting brackets. Once the pots have been mounted to the panels, if something goes wrong, it's easy to remove a single pot and solve the problem and even replant and then pop it back into its original position.
Position the meshed screen plate inside the pot with the two supporting legs faced down.
Plant the pot using the correct selecting the right potting mix for the plants used.
Mount the pots onto the wall mounting brackets. Each pot has a flat hook at the rear that slides into the center slot on the mounting brackets. The slot is wider than the flat hook and this allows some movement when positioning the pots.
Once the pot is mounted and in position, insert the micro stake into the pot and position the micro stake near the center of the pot. Anchor the micro stake, which can be pushed into the potting mix, so it doesn't get blown or sprung out of position.
If you are growing a selection of plants, please be aware that the top row is best for taller growing plants as their natural vertical habit of growth is upward. For the second row of panels with pots it's better to choose plants with a flat or even trailing growth habit so these can get access to sunlight.
Once all the pots are in place and the drip system is connected, turn the water on and check if the system is working well. If it is leaking somewhere, investigate the issue and fix it. Pressure-test the system to identify leaks in the laterals and fittings, and then program the hose end timer if used.
Water the plants as regularly as required. As a rule, the surface of the soil should dry out between each watering. Watering requirements will vary as determined by location, weather, plant and soil type. Use a hose end timer to regulate how much water is applied to the plants.
It is a simple to add extra pots. Once you have the mounting brackets pots installed use the same method to add additional wall mounting brackets and pots. Use the same method to expand the irrigation system.
Robust and reliable "spinner" sprinkler for use above and below plant foliage and with two trajectory options. Excellent Sprinkler Distribution patterns and performance.
Features
Dual outlet spinner enhances performance.
Standard model has a 25° trajectory, black coloured spinner.
Inverted model has a 0° flat trajectory, khaki colored spinner.
Suitable for recycled water applications subject to adequate filtration.
Easily taken apart for servicing.
1/2" Male thread
UV stabilized materials for long life.
Applications Greenhouses, vegetable row crops and under tree watering. Inverted Rotor Max™ is ideal for over-head watering in glasshouse, nursery and shade house applications. The 0° trajectory sprinkler is also suited to standard upright operation, excellent for under foliage or wind affected locations.
Dig's Modular Vertical Garden Wall Mounting Brackets are designed to attach to any structure and are easily expanded by attaching additional mounting brackets that are secured to each other utilizing a unique self-lock system.
Features
A convenient, durable wall mounting bracket allows the pots to be easily hung and removed from the wall
Unique design with simple self-lock position of the mounting bracket allows for quick and easy system installation and expansion
Determine what pattern you want to create and mount the wall mounting brackets accordingly.
The low maintenance wall mounting bracket provides an open area between the pots and the wall, supporting protection from moisture and preventing discoloration of the exposed wall.
The durable modular mounting brackets can be connected in a wide range of patterns with vertical or horizontal layout for any pattern desired
Specifications
Modular wall mounting bracket: 7" (17.8 cm) Width x .7" (1.7 cm) Depth x 4.5" (11 cm) Height
Wall mounting bracket color: black
Screw size: # 8 x 3/4" length x 4
Wall mounting bracket weight: .121 lbs. (0.055 kg)
Mounting start from the left side
Spacing: between 12" to 18" (30 to 45 cm) of each level.
This universal tubing works with most new or existing drip systems. To distribute water (above or below ground) from main pipe to drippers, misters and low volume sprinklers. UV-resistant.
Features and Benefits
UV-resistant
Made of high quality polyethylene material
1/4" Polyethylene Distribution Tubing - Forest Green
This universal tubing works with most new or existing drip systems. To distribute water (above or below ground) from main pipe to drippers, misters and low volume sprinklers. UV-resistant.
Features and Benefits
UV-resistant
Made of high quality polyethylene material
Compression Couplng
1/2" (.700 OD)
SKU : DR-10607
Compression fittings are designed for easy connections without the use of glues or clamps.
Made with high impact UV resistant plastic
Secure and easy installation without glue or clamps
Works with the most common sizes of 1/2" Drip tubing (.700 OD)
Maximum operating pressure: up to 60 PSI
Recommended operating pressure: 15 to 35 PSI (25 PSI pressure regulator is recommended)
The Maxi-Paw's powerful throw permits maximum spacing and offers superior close-in watering and uniform water distribution. Low pressure loss and an efficient, straight-through flow design conserve energy and are ideal for dirty water applications.
The optional Seal-A-Matic™ prevents run-off, puddling, and erosion caused by low head drainage. And most important, it's rugged and dependable, popping up on schedule again and again because of the multi-function wiper seal.
The Maxi-Paw Rotor -- a tradition of excellence.
Proven impact drive.
Straight-through flow for superior performance in dirty water.
Radius: 22 to 45 feet (6.7 to 13.7 m)
Blue #8 nozzle pre-installed.Radius: 28 to 42 feet (8.8 to 12.7 m)
Five interchangeable, color-coded MPR nozzles with standard trajectory (sold separately).
Two interchangeable low angle (LA) nozzles (sold separately).
Easy to adjust, easy to service.
No tools required to change nozzles.
Heavy-duty plastic case with sturdy, reinforced ribbed design.
Double-weighted arm for slower rotation and increased distance of throw.
Self-flushing inner trip with improved inner trip lever.
Powerful reverse action.
Adjustable arm spring for low-pressure and low-gallonage operation.
Energy efficient, low pressure and low-gallonage operation.
360° Full-circle OR arc adjustable from 20° to 340°.
Precision Jet tube (PJ™) minimizes side splash.
Hooded bearing for longer life.
Distance control diffuser pin.
Multi-function, pressure-activated wiper seal.
Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction.
Combination 1/2" (15/21) or 3/4" (20/27) bottom inlet.
Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down.
FP trip for full- or part-circle operation.
Side or combination bottom inlet for design flexibility.
Side inlet installation is not recommended in freezing climates.
Serviceable through the top of the case.
Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water.
Optional nonpotable cover.
3 years warranty
Rain Bird 2045a Maxi-Paw
How to Adjust the Throw Pattern on Rain Bird Impact Sprinklers
How to Adjust the Throw Distance on Rain Bird Impact Sprinklers
Orbit® Pop-up Impact Sprinkler
Pulse XL Model
SKU : OG-55201
With coverage up to 45 ft. in Dia, the Pulse XL pop-up is the perfect replacement for large area impact heads. Universal design fits with Rain Bird(R) and most other brands. Features 3 in. pop-up height and flow-thru design for superior dirty water performance. Dual 3/4 in. and 1/2 in. threaded bottom inlets. 1/2 in. threaded side inlet.
7.5 cm (3 in.) pop-up when head is in up
Extra nozzles included for use in high pressure or low pressure irrigation systems
3/4 in. and 1/2 in. bottom inlet
1/2 in. threaded side inlet
Fully adjustable spray pattern, full or part circle
For outdoor use only
For irrigation applications only
For cold water use only
Features 3 in. pop-up height and flow-thru design
With coverage up to 45 ft. in diameter
PEX Cinch Clamps
3/4" SS Cinch Clamps
SKU : PEX-SSC075
The pinch clamps utilizes a stainless steel stepless clamp that together with brass insert fittings provides a permanent, leak proof connection which can be installed in seconds.
The pinch clamps ratchet tool is the one tool for all connections on all sizes of PEX tubing (3/8" through 1") No other tools or adapters are required and no calibration is necessary. The ratchet tool will only release when the assembly is completed.
The pinch clamps simplifies the assembly process. The pinch clamps crimp ring creates a water tight seal by grabbing hold and compressing the PEX tubing onto the insert fitting.
Use with pinch clamp tool
Only for PEX tubing. Do not use with irrigation tubing.
PEX Cinch Clamps
1" SS Cinch Clamps
SKU : PEX-SSC100
The pinch clamps utilizes a stainless steel stepless clamp that together with brass insert fittings provides a permanent, leak proof connection which can be installed in seconds.
The pinch clamps ratchet tool is the one tool for all connections on all sizes of PEX tubing (3/8" through 1") No other tools or adapters are required and no calibration is necessary. The ratchet tool will only release when the assembly is completed.
The pinch clamps simplifies the assembly process. The pinch clamps crimp ring creates a water tight seal by grabbing hold and compressing the PEX tubing onto the insert fitting.
Use with pinch clamp tool
Only for PEX tubing. Do not use with irrigation tubing.
The Orbit 57095 outdoor mounted control timer cabinet holds an indoor sprinkler timer to safeguard it from rigid weather conditions. This protective cabinet works with any major brand of automatic water timer and is made of durable, UV- and weather-resistant ABS resin. The Orbit 57095 offers a key-accessible lock that prevents theft and tampering as well as a GFI outlet that reduces electric shock risk.
Converts indoor timers for outdoor use
Solid construction protects sprinkler timer from harsh weather, and keyed lock prevents tampering
Fits major Brand timers
GFCI receptacle
Large interior dimensions 9.25 in. X 10.75 in. X 3.25 in.
Converts indoor timers for outdoor use
Fits major brand timers
Water Alarm
700 Model
SKU : WA-00700
The Sonin 00700 Water Alarm with Remote Sensor detects leaks and sounds alarm. For early warning of leaks that may cause damage. Although it will not stop leaks, it is an early warning that leaks need tending. It gives you time to move valuables out of the path of the leak. Helps protect against costly water damage. Warns of leaks and overflows in bath, kitchen, laundry, furnace or computer rooms. Alerts user within hearing range that water has reached desired level when used to monitor the filling of pools, tubs, sinks, aquariums and more. An ideal accessory for sump and bilge pumps in residential, commercial and marine applications. Requires one 9-Volt battery (not included). One year limited warranty.
Minimal water is required to activate alarm.
Remote sensor with suction cup may be placed up to 6 feet from alarm unit.
85 db buzzer sounds for 3 days.
Convenient test button and low battery alarm.
Works on 9 volt battery (not included).
Alarm unit wall mountable.
Complete instructions enclosed.
One year limited warranty.
Amazon Regular Price $38,49
Blu-Lock® 31373 | 37373 - Tee
3/4" BL X 1/2" BLR Tee
SKU : OP-37373
Working in a sprinkler trench is tough enough— don’t make it harder by using traditional pipe fitting methods that require hot, toxic glue, clamps or frustrating barbed fittings.
Irrigation Depot offers a better way: Blu-Lock®.
Everything you do from the valve out, you can now do faster and easier with Blu-Lock®. Glue? Clamps? Tools? With this exclusive system, you don’t need them! Simply stated, Blu- Lock® is the future of irrigation installation.
Working in a sprinkler trench is tough enough— don’t make it harder by using traditional pipe fitting methods that require hot, toxic glue, clamps or frustrating barbed fittings.
Irrigation Depot offers a better way: Blu-Lock®.
Everything you do from the valve out, you can now do faster and easier with Blu-Lock®. Glue? Clamps? Tools? With this exclusive system, you don’t need them! Simply stated, Blu- Lock® is the future of irrigation installation.
Working in a sprinkler trench is tough enough— don’t make it harder by using traditional pipe fitting methods that require hot, toxic glue, clamps or frustrating barbed fittings.
Irrigation Depot offers a better way: Blu-Lock®.
Everything you do from the valve out, you can now do faster and easier with Blu-Lock®. Glue? Clamps? Tools? With this exclusive system, you don’t need them! Simply stated, Blu- Lock® is the future of irrigation installation.
Working in a sprinkler trench is tough enough— don’t make it harder by using traditional pipe fitting methods that require hot, toxic glue, clamps or frustrating barbed fittings.
Irrigation Depot offers a better way: Blu-Lock®.
Everything you do from the valve out, you can now do faster and easier with Blu-Lock®. Glue? Clamps? Tools? With this exclusive system, you don’t need them! Simply stated, Blu- Lock® is the future of irrigation installation.
Working in a sprinkler trench is tough enough— don’t make it harder by using traditional pipe fitting methods that require hot, toxic glue, clamps or frustrating barbed fittings.
Irrigation Depot offers a better way: Blu-Lock®.
Everything you do from the valve out, you can now do faster and easier with Blu-Lock®. Glue? Clamps? Tools? With this exclusive system, you don’t need them! Simply stated, Blu- Lock® is the future of irrigation installation.
The Blu-Lock® Nitro® Saddle Tee will do so much for the convenience factor in working with poly pipe, irrigation installers may begin leaving their tools in the truck.
To make a rock solid connection for spray heads anywhere along the line, all you do is wrap and lock the heavy gauge ratcheting saddle around the pipe, then turn the piercing cap all the way down to its locked position.
There’s less digging needed for clearance. And when the system is pressurized, the connection gets even stronger, guarding against water leaks and waste.
Quick installation
Simple one-hand application – just strap it and tap it.
No fasteners or tools required.
Installs with less excavation.
Durable, worry-free design
Positive locking saddle strap and cap won’t work loose and leak.
Provides an even tighter seal with water pressure.
Nearly indestructible design and materials – reduced chance of callbacks.
Better flow
When cap is locked, flow ports automatically align with flow direction.
Flow port shape and automatic alignment maximize available pressure for enhanced irrigation performance.
No Tools - Just push the saddle until it clicks, twist in the tap, and attach the swing pipe.
The Blu-Lock® Nitro® Saddle Tee will do so much for the convenience factor in working with poly pipe, irrigation installers may begin leaving their tools in the truck.
To make a rock solid connection for spray heads anywhere along the line, all you do is wrap and lock the heavy gauge ratcheting saddle around the pipe, then turn the piercing cap all the way down to its locked position.
There’s less digging needed for clearance. And when the system is pressurized, the connection gets even stronger, guarding against water leaks and waste.
Quick installation
Simple one-hand application – just strap it and tap it.
No fasteners or tools required.
Installs with less excavation.
Durable, worry-free design
Positive locking saddle strap and cap won’t work loose and leak.
Provides an even tighter seal with water pressure.
Nearly indestructible design and materials – reduced chance of callbacks.
Better flow
When cap is locked, flow ports automatically align with flow direction.
Flow port shape and automatic alignment maximize available pressure for enhanced irrigation performance.
No Tools - Just push the saddle until it clicks, twist in the tap, and attach the swing pipe.
How to put your Saddle Tee on Blu-Lock Pipe
Sprinkler Insert PVC Fittings - Tee
1" Insert Tee - Box of 80 - $0,62 Each
SKU : P-1401010-80PACK
Insert fittings for polyethylene tubing. Ideal for irrigation or sprinkler systems. Insert fittings should be used in conjunction with stainless steel gear clamps or irrigation crimp clamps to ensure lasting unions for your irrigation system.
1" barb x 1" barb x 1" barb tee
For use with poly pipe (pipe-to-pipe connections)
Hanging Clamp
Model for 1/2" Tubing
SKU : DR-10293
Used in vineyard or others applications where a wire is suspended along the vines and between posts. The drip tubing is attached to the wire with hooks.
The hook will suspend the pipe and preventing the drip hose from moving and keeping emitters in the proper position for efficient watering.
Hydro-Rain's new 3-station LED Landscape Light Controller/Transformer, with a built in 60 Watt power supply, is ideal for providing the ultimate in control for a landscape lighting system. Three independently, fully programable stations allow for a landscape to be sectioned off by area, function, or type of light fixture, providing additional security, comfort, and beauty, while maintaining optimal energy savings. A weather-proof housing and light sensor on an expandable 10 ft cable facilitate indoor or outdoor mounting. Swing door access and simple screw terminals make it easy for anyone to wire.
BENEFITS OF INDEPENDENT STATIONS - Multiple stations allow for managing groups of lights independently. For instance, lights can turn on for guests approaching the home in front, without activating the lights in the back of the house. Stations for spot lights can be programmed to turn on at different times then path lights. Lighting stations can also be independently activated by individual motion sensors (sold seperately).
SPECIFICATIONS
3-Zone Controller with Built-In Power Supply
Ideal for LED Landscape Lights
3 Independently, Fully-Programable Zones
60 Watt Switch Mode Transformer
6 Independent Start Times
Indoor/Outdoor Mount
Motion Sensor Capable
Simple Programming with Easy-Set Logic™
LED Landscape Path Light with Conical Shade | Hydro-Rain | 06701 | HRL-BKP1-LED-3W
The welcoming, warm light generated by Hydro-Rain's new LED Landscape Path Lights adds ambiance and security to any landscape. Made with durable, premium materials and a high-quality LED, these pathlights promise to give years of balanced lighting and beauty.
Features and Benefits
3 Watt LED Light
Aluminum Light with Textured Black Finish
Provides Soft White Light
Uses Less Energy than Incandescent Lights
LED Landscape Path Light with Conical Shade | Hydro-Rain | 06703 | HRL-BRP1-LED-3W
The welcoming, warm light generated by Hydro-Rain's new LED Landscape Path Lights adds ambiance and security to any landscape. Made with durable, premium materials and a high-quality LED, these pathlights promise to give years of balanced lighting and beauty.
Features and Benefits
3 Watt LED Light
Aluminum Light with Textured Bronze Finish
Provides Soft White Light
Uses Less Energy than Incandescent Lights
LED Landscape Spotlight | Hydro-Rain | 06721 | HRL-BKS1-LED-3W
The crisp, clean light illuminating from Hydro-Rain's new LED Landscape Spotlight enriches the beauty and security of any house or landscape. Durable construction and premium materials together with LED efficiency provide years of outstanding performance.
Features and Benefits
3 Watt LED Light
Aluminum Light with Black Finish
Provides Bright White Light
Uses Less Energy than Incandescent Lights
LED Landscape Spotlight | Hydro-Rain | 06722 | HRL-BRS2-LED-3W
The crisp, clean light illuminating from Hydro-Rain's new LED Landscape Spotlight enriches the beauty and security of any house or landscape. Durable construction and premium materials together with LED efficiency provide years of outstanding performance.
Features and Benefits
3 Watt LED Light
Aluminum Light with Bronze Finish
Provides Bright White Light
Uses Less Energy than Incandescent Lights
LED Landscape Spotlight | Hydro-Rain | 06723 | HRL-BRS1-LED-3W
The crisp, clean light illuminating from Hydro-Rain's new LED Landscape Spotlight enriches the beauty and security of any house or landscape. Durable construction and premium materials together with LED efficiency provide years of outstanding performance.
Features and Benefits
3 Watt LED Light
Aluminum Light with Bronze Finish
Provides Bright White Light
Uses Less Energy than Incandescent Lights
LED Landscape Path Light with Louvered Shade | Hydro-Rain | 06702 | HRL-BRP2-LED-3W
The welcoming, warm light generated by Hydro-Rain's new LED Landscape Path Lights adds ambiance and security to any landscape. Made with durable, premium materials and a high-quality LED, these pathlights promise to give years of balanced lighting and beauty.
Hydro-Rain's stylish Motion Sensor adds increased flexibility to outdoor landscape lighting. Connecting directly into Hydro-Rain's Landscape LED Light Controller, it can be mounted on any wall or hidden in a garden or flowerbed with its stake-mount option. The sensor features an 180 degree motion detection angle that senses movement up to 70 feet away.