Brown Dripline - 1/2"

Click image to enlarge

Flow rate: 1GPH Dripper Spacing: 12" Coil: 1/2" x 100' OD .670"
Quantity x

Flow rate: 1GPH Dripper Spacing: 12" Coil: 1/2" x 250' OD .670"
Quantity x

Excel series PC dripline is an advanced, pressure-compensating, linear low-density polyethylene drip line. The cylindrical flow-regulated inline emitters are self-contained units molded at specified intervals into the inner wall of the polyethylene tubing. Each has a self-cleaning mechanism at the water outlet chamber. Both the tubing and the drippers are manufactured from the finest quality resins to ensure uniform watering from each emitter, year after year.


  • Used for above or below grade installation
  • Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures
  • Flow uniformity regardless of operating pressure and variation along the line
  • The dripper and the diaphragm are self-contained units that are molded to the interior wall of the tubing
  • Turbulent flow through a large labyrinth water passage helps reduce clogging
  • Clogging is also reduced due to the dripper's filter intake area being continuously flushed by the water flow
  • Made of three (3) individual sections including a cylindrical plastic housing with labyrinth water passage, a floating silicon diaphragm and a plastic receptacle
  • Two (2) outlets per dripper ensures a reduced chance of clogging
  • Resistant to chemicals and fertilizers commonly used in landscaping
  • Flexible tubing for easy installation
  • Used with low density, UV resistant, 7510 polyethylene resins with Fingerprint™
  • Diameters: .570 ID x .670 OD (14.4 mm ID x 17 mm OD)


  • Flow rates:
    • .58 GPH (2.2 L/H) color code - yellow
    • .95 GPH (3.6 L/H) color code - white
  • Operating pressure: 12-50 PSI (0.8-3.5 BAR)
  • Color code: black or brown
  • Materials: Low-density polyethylene resin
  • Sizes: .570" ID x .670" OD (14.5 mm ID x 17 mm OD)
  • Spacing: 12”, 18”, 24”, 30 and 36” (30 cm, 46 cm, 61 cm, 76 cm and 91 cm)
  • Lengths: 100’, 250’, 500’ and 1000’ coils
  • (30 m, 76 m, 152 m and 305 m)
  • Minimum bending radius: 1’ (.3 m)
  • Filter requirement: minimum of 150 mesh


Back to department : Dripline