Silver Bullet has a unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure. It has high-strength glass-filled nylon body and, cover with ¼” stainless steel cover bolts and mating brass body inserts.

FEATURES:

• Fail safe "reverse flow" design insures that the valve will remain closed in the event of a diaphragm wall failure and extends diaphragm life.
• Excellent for micro-irrigation, valve will operate as low as 1 GPH.
• Dual diaphragm ports.
• Internal manual bleed lever opens and closes the valve with a flip of the finger.
• Heavy-duty glass filled body.
• Shock cone incorporated in the diaphragm slows the water during closing to minimize water hammer.
• 5 year warranty.

Not compatible with the old model (body and diaphragme). Only the solenoid is compatible with the old model.

Economical irrigation valve for residential and light commercial applications.

FEATURES:

• Fail safe "reverse flow" design insures that the valve will remain closed in the event of a diaphragm wall failure and extends diaphragm life.
• Excellent for micro-irrigation, valve will operate as low as 1 GPH.
• Dual diaphragm ports.
• Internal manual bleed lever opens and closes the valve with a flip of the finger.
• Heavy-duty glass filled body.
• Shock cone incorporated in the diaphragm slows the water during closing to minimize water hammer.

  5 year warranty.

Economical irrigation valve for residential and light commercial applications.

The unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of the line pressure, providing zero stress to prevent “stretching”, a common cause in valve failure.

FEATURES:

• 100% water tested
• 150 PSI (10,3 BAR) rating
• Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure
• Reverse flow design for water conservation in the event of failure
• Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
• Molded shock cone for smooth operation and reduction of water hammer
• Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
• Marine-grade S20P solenoid with stainless steel actuator
• Engineering grade PVC body and Phillips retaining screws
• Non-rising flow control stem throttles valve from full open to closed position on flow control models

2 year warranty.